sipgate basic Help

Mitel 5215, 5220, 5224, 5235, 5320, 5330, 5340

The general settings to use with any SIP Compliant VoIP phone are described here.

The settings in the following images should help to configure your Mitel Phone with sipgate. 

You'll need your SIPID and SIP Password to set up your Mitel phone. 


SIP Configuration / Advanced Features:



Media Configuration:

The Audio Codec Types supported by sipgate are listed here

If you've problems with touch tones or IVR menus, please test with DTMF Type set to Outband.


Testing your Phone's Set Up:

To test your phone's configuration, please dial the following sipgate numbers:

  • 10000
  • 10005
  • 10020

For further tests and information please click here.


If you have problems with registering online or making calls, please test with the STUN Server enable: 


Using Multiple Phones Behind the Same Router:

If there's more than one VoIP phone/device on the same local network, assigning each different local UDP ports will avoid port conflicts.

For each SIP Phone or device you add, increment the local ports used by 100.

For a Help article about local port numbering, please click here.


If you have problems registering your phone online, with placing calls, or with audio quality try the troubleshooting advice in the following Help Articles:



The settings in this guide won't be regularly checked for accuracy and are based firmware version v6.  The layout of your settings may differ somewhat, but the general settings to use with sipgate won't change.

If you notice any problems with the settings in this guide, or if there are any additional settings, options or issues to be aware of, please let our support know. 



Need Some Help? Submit a request